This is an official version. Copyright ©2021: Queen's Printer, Important Information
Newfoundland and Labrador NEWFOUNDLAND Timber
Scaling Regulations (Amendment) (Filed May 6, 2021) Under the authority of section 141 of the Forestry Act, I make the following regulations. Dated at St. John’s, May 5, 2021. Derrick Bragg REGULATIONS Analysis 1.
S.2 Amdt. 2.
S.12 Rep. 3.
S.13 Amdt. 4.
S.15 R&S 5.
S.19 R&S CNLR 987/96 1. (1) Paragraph 2(e) of the Timber Scaling Regulations is amended by deleting the word "ton" and substituting the word "tonne". (2) Paragraph 2(h) of the regulations is amended by deleting the word "ton" and substituting the word "tonne". (3) Section 2 of the regulations is amended by deleting the word "and" at the end of paragraph (g), by deleting the period at the end of paragraph (h) and substituting a semicolon, by adding the word "and" at the end of paragraph (h), and by adding immediately after paragraph (h) the following: (i) "studwood" means trees manufactured into stud lumber up to 3 metres in length. 2. Section 12 of the regulations is repealed. 3. Section 13 of the regulations is amended by deleting the word "prescribed" and substituting the word "required". 4. Subsection 15 of the regulations is repealed and the following substituted: Renewal of certificate 15. (1) The board shall renew a scaler’s certificate where the scaler provides proof satisfactory to the board that the scaler has scaled primary forest products in the 5 year period before expiry of the certificate. (2) Where a scaler has not satisfied the requirement in subsection (1), the board shall refuse to renew the certificate until the scaler has completed a scaling course as approved by the board. 5. Section 19 of the regulations is repealed and the following substituted: Payment for scaling 19. When timber is scaled for the purpose of payment, the following units of measure apply:
©Queen's Printer |